메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2007도 추계학술대회 강연 및 논문 초록집
발행연도
2007.10
수록면
284 - 289 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A VCHP with a separate NCG container was fabricated and tested for its thermal performance, especially as a function of the NCG charge amount. The heat pipe wall was made of copper and the working fluid was distilled water. STS-316 screen of mesh number 100 was inserted as a capillary structure. The NCG container was made of stainless steel and was attached to the condenser end of the heat pipe across a valve. As a baseline performance, a VCHP of the same dimensions was tested in advance to compare with the one with NCG. The outer diameter of the heat pipe was 12.8 ㎜ and the total length was 600 ㎜. The evaporator and the condenser lengths were both 200 ㎜. The thermal load ranged from 20 to 300W. Typical result revealed that the operating temperature of the VCHP maintained almost constant against a variation of the thermal load. However, the operating temperature of the VCHP increased with increasing the charged mass of non-condensable gas. The performance of the VCHP was analyzed from the viewpoint of the effective thermal conductance and the temperature control characteristics.

목차

Abstract
1. 서론
2. 실험장치 및 실험방법
3. 실험결과 및 분석
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-016067438