메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한기계학회 Journal of Mechanical Science and Technology Journal of Mechanical Science and Technology Vol.21 No.10
발행연도
2007.10
수록면
1,528 - 1,533 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The forward slip in strip rolling was defined as the relative difference between the roll surface speed and strip exit speed. It was always an important parameter because of its significant influence on friction and tension control. In this study a Phantom V3.0 digital high speed image acquisition and motion analysis system was used to record the movement of the roll and the workpiece during rolling. The pictures captured were analyzed to obtain the speeds of the roll and the workpiece along the roll bite, which then yielded the forward slip. The measurement accuracy has been validated by the mass conservation. The maximum relative error of the forward slip was only 1.6 %. The results have shown that the forward slip increased as the reduction increased for both dry and lubricated rolling. The roll speed did not change the forward slip in the case of dry rolling, but the forward slip was significantly reduced with roll speed when lubricated.

목차

Abstract
1. Introduction
2. Speed measurement
3. Experiments
4. Results and discussion
5. Conclusion
References

참고문헌 (5)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-015932790