지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2007.6
- 수록면
- 165 - 174 (10page)
이용수
초록· 키워드
오류제보하기
This study examines the connection methods of the upper parts at wooden architecture between the late Goryeo Dynasty(918~1392) and Joseon Dynasty(1372~1910). The scope of this study includes the joint and splice methods between the pillars and penetrating tie beams(창방), which perform the important parts to transmit the vertical and horizontal load. This examination is on the joint and splice methods of the outer(평주) and corner pillars(우주). Through the investigation, it is verified that the connection methods between pillars and penetrating tie beams on the outer or conner pillars is the technique utilizing Yanggal joint(two way joint, 양갈맞춤), Sagal joint(cross joint, 사갈맞춤), dovetailed tenon joint(주먹장맞춤), and Yukgal joint(three way joint, 육갈맞춤).
The method of Yanggal joint is to connect the outer pillars with the penetrating tie beams by carving out the upper part of the pillars as ‘一' shape. Through the study, it is verified that tenon joint(통장부맞춤) is used in the Jusimpo(column brackets) system buildings, mortise and tenon joint(장부맞춤) is applied in Dapo (multi-bracket sets) system and Ikgong (wing-shaped bracket sets) system buildings.
The method of Sagal joint is to connect the outer pillars with the penetrating ties and individual timber units by carving the upper parts of the pillars as ‘十' shape, or the conner pillars with the penetrating tie beams. Tenon joint is mostly used in the Jusimpo system building, mortise and tenon joint in Dapo and Ikgong system buildings, while dovetailed tenon joint in the Jusimpo, Dapo, and Ikgong system.
The method of dovetailed tenon joint is named after its joint shape of connecting outer pillars with penetrating tie beams. It is mostly used in the Dapo system buildings to decrease clamping force due to the end check, which is more secure method than that of Yanggal joint.
The method of Yukgal joint is to connect the outer pillars with the penetrating tie beams and individual timber units by carving the upper parts of the pillars as the three way of the tenon hole. It is verified that tenon joint is applied in Dapo and Ikgong system buildings.
The method of Yanggal joint is to connect the outer pillars with the penetrating tie beams by carving out the upper part of the pillars as ‘一' shape. Through the study, it is verified that tenon joint(통장부맞춤) is used in the Jusimpo(column brackets) system buildings, mortise and tenon joint(장부맞춤) is applied in Dapo (multi-bracket sets) system and Ikgong (wing-shaped bracket sets) system buildings.
The method of Sagal joint is to connect the outer pillars with the penetrating ties and individual timber units by carving the upper parts of the pillars as ‘十' shape, or the conner pillars with the penetrating tie beams. Tenon joint is mostly used in the Jusimpo system building, mortise and tenon joint in Dapo and Ikgong system buildings, while dovetailed tenon joint in the Jusimpo, Dapo, and Ikgong system.
The method of dovetailed tenon joint is named after its joint shape of connecting outer pillars with penetrating tie beams. It is mostly used in the Dapo system buildings to decrease clamping force due to the end check, which is more secure method than that of Yanggal joint.
The method of Yukgal joint is to connect the outer pillars with the penetrating tie beams and individual timber units by carving the upper parts of the pillars as the three way of the tenon hole. It is verified that tenon joint is applied in Dapo and Ikgong system buildings.
목차
Abstract
1. 서론
2. 본론
3. 결론
참고문헌
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
조선후기 경복궁 근정전 주요 구조재의 맞춤과 이음에 관한 연구
건축역사연구 : 한국건축역사학회논문집
2007 .01
-
조선시대 목조건축 도리와 보의 결구방법에 관한 연구
건축역사연구 : 한국건축역사학회논문집
2007 .01
-
${Al}_{2}{O}_{3}$/304스트레인레스강 접합체 계면구조가 접합강도에 미치는 영향
한국재료학회지
1993 .01
-
봉정사 극락전의 목조 결구방법에 관한 연구
대한건축학회 논문집 - 계획계
2006 .04
-
Analysis on mechanical behavior of dovetail mortise-tenon joints with looseness in traditional timber buildings
Structural engineering and mechanics : An international journal
2016 .01
-
Research on damage and identification of mortise-tenon joints stiffness in ancient wooden buildings based on shaking table test
Structural engineering and mechanics : An international journal
2018 .01
-
Comparison of Joint Models under Worst Loads
한국자동차공학회 춘 추계 학술대회 논문집
1993 .11
-
조선시대 다포계 건축물의 결구형태별 구조성능 평가
한국구조물진단유지관리공학회 논문집
2019 .01
-
축약 행렬법을 적용한 차체 결합부 해석
한국자동차공학회 춘 추계 학술대회 논문집
1996 .11
-
강섬유를 이용한 RCS 보-기둥 접합부의 내진 거동에 관한 실험적 연구
대한건축학회 학술발표대회 논문집 - 구조계
2003 .10
-
저진동 차체 설계를 위한 결합부 강성 최적화 결정법
한국자동차공학회 춘 추계 학술대회 논문집
1996 .06
-
버스 윈도우 필라 결합부재의 최적설계에 관한 연구
한국자동차공학회 춘 추계 학술대회 논문집
1997 .11
-
Analytical modeling of thin-walled box T-joints
Structural engineering and mechanics : An international journal
2009 .01
-
버스 윈도우 필라 부재의 형상 최적 설계기술 개발
한국자동차공학회 춘 추계 학술대회 논문집
1998 .11
-
버스 원도우 필라 부재의 형상 최적 설계기술 개발
한국자동차공학회논문집
1999 .08
-
전통목조 주먹장 접합부 파괴모드와 인장강성에 관한 연구
대한건축학회 학술발표대회 논문집 - 구조계
2009 .10
-
축약 행렬법을 적용한 차체 결합부 해석
한국자동차공학회논문집
1998 .07
-
Interaction of internal forces of interior beam-column joints of reinforced concrete frames under seismic action
Structural engineering and mechanics : An international journal
2014 .01
-
실험계획법을 이용한 진공유리 Pillar 재료의 혼합비율 최적화
한국산학기술학회 논문지
2012 .03
-
인가 하중에 따른 센터필러의 구조해석
한국기계기술학회지
2018 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
창덕궁 침전일곽의 건축 형식 변천에 관한 연구 : 임진왜란 후 재건 때부터 일제강점기 초기까지
김지현
,
이상해
,
윤인석
대한건축학회 논문집 - 계획계
2014
.12
용마루 : 인하 건축동인 - 건축을 조감하다
동정근
,
박유진
건축과사회
2013
.12
한국 전통목조건축 연구의 과제와 방법
이상해
미술사학연구(구 고고미술)
2004
.03
多包건축의 귀포 形式 變遷에 관한 硏究 : 內外 2出目 공포를 중심으로
류성룡
대한건축학회 논문집 - 계획계
2006
.06
향교건축에서 누의 기능과 건립상황에 관한 연구 ( A Study on function and state of construction of `Lue` in Hyanggyo architecture )
조영화
,
김일진
대한건축학회 논문집
1995
.02
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-540-016770481