지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이 논문의 연구 히스토리 (3)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
In this paper an effective two-phase approach adopting modified p-median mathematical model is proposed for grouping machines and parts in cellular manufacturing(CM). Unlike the conventional methods allowing machines and parts to be improperly assigned to cells and families, the proposed approach seeks to find the proper block diagonal solution where all the machines and parts are properly assigned to their most associated cells and families in term of the actual machine processing and part moves. Phase 1 uses the modified p-median formulation adopting new inter-machine similarity coefficient based on the non-binary production data-based part-machine incidence matrix(PMIM) that reflects both the operation sequences and production volumes for the parts to find machine cells. Phase 2 applies iterative reassignment procedure to minimize inter-cell part moves and maximize within-cell machine utilization by reassigning improperly assigned machines and parts to their most associated cells and families. Computational experience with the data sets available on literature shows the proposed approach yields good-quality proper block diagonal solution.
목차
Abstract
1. Introduction
2. Constraints for Machine-part Grouping
3. Two-Phase Approach to MPG
4. Illustrative Example and Comparison
5. Computational Experiment
6. Summary and Concluding Remarks
References
참고문헌 (42)
참고문헌 신청
Chang , 1994 , An extension to the p-median group technology algorithm : 119 ~ 125
Chen, S.J. , 1995 , A new neural network-based cell formation algorithm in cellular manufacturing 33 (2) : 293 ~ 318
Chu, C.H , 1995 , Recent advances in mathematical programming for cell formation and Analysis of Cellular Manufacturing Systems : 1 ~ 46
Adenso-Daz, B , 2005 , Part-machine grouping using weighted similarity coefficients 48 (2) : 553 ~ 570
Gupta , 1990 , Production data based similarity coefficient for machine-part grouping decisions in the design of a cellular manufacturing system International Journal of Production Research : 1247 ~ 1269
Chen, S.J. , 1995 , A new neural network-based cell formation algorithm in cellular manufacturing 33 (2) : 293 ~ 318
Chu, C.H , 1995 , Recent advances in mathematical programming for cell formation and Analysis of Cellular Manufacturing Systems : 1 ~ 46
Adenso-Daz, B , 2005 , Part-machine grouping using weighted similarity coefficients 48 (2) : 553 ~ 570
Gupta , 1990 , Production data based similarity coefficient for machine-part grouping decisions in the design of a cellular manufacturing system International Journal of Production Research : 1247 ~ 1269
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
[FB6 생산계획 및 관리] Group Technology Cell Formation Using Production Data-based P-median Model
한국경영과학회 학술대회논문집
2003 .05
-
Two-Phase Approach for Machine-Part Grouping Using Production Data-based P-median Model
한국경영과학회 학술대회논문집
2007 .05
-
Effective Artificial Neural Network Approach for Non-Binary Incidence Matrix-Based Part-Machine Grouping
한국경영과학회지
2006 .12
-
P-Median Approach for the Large-Size Multi-Objective Generalized Cell Formation
경영과학
2018 .06
-
[B4 생산재고관리] Cellular manufacturing system design with proper assignment of machines and parts
한국경영과학회 학술대회논문집
2002 .06
-
Part-Machine Grouping Using Production Data-based Part-Machine Incidence Matrix : Neural Network Approach - Part 2
한국경영과학회 학술대회논문집
2006 .11
-
[SESSION A2 FMS/생산일정]GT 생산시스템에서 비퇴화 셀 형성을 위한 2단계 p-median 접근법
한국경영과학회 학술대회논문집
2001 .10
-
Solving Machine Relocation Problem in Reconfigurable Manufacturing Systems
한국경영과학회 학술대회논문집
2015 .04
-
셀형 제조시스템설계를 위한 Machine-Part의 그룹형성에 관한 연구 ( A Study on Machine-Part Group Formation for Designing the Cellular Manufacturing Systems )
한국경영과학회 학술대회논문집
1996 .01
-
대단위 부품-기계 군집 문제를 위한 Look-ahead 휴리스틱 알고리듬
한국경영과학회지
2005 .09
-
Efficient linear Models for Solving the Machine-part Cell Formation Problem in Group Technology Manufacturing
한국경영과학회 학술대회논문집
1996 .01
-
AS/RS에서 S/R Machine의 가/감속도를 고려한 운행시간에 관한 연구 ( A Study on the Travel-Time Model with Acceleration/Deceleration of a S/R Machine in an AS/RS )
한국경영과학회 학술대회논문집
1995 .01
-
재투입이 존재하는 2단계 순열흐름공정에서 총 작업 흐름시간을 최소화하는 분지한게방법
한국경영과학회 학술대회논문집
2010 .06
-
THE VARIATION OF ONE MACHINE SCHEDULING PROBLEM
한국경영과학회 학술대회논문집
1993 .01
-
대체가공경로와 가공순서를 고려한 부품-기계 군집 알고리즘
한국경영과학회 학술대회논문집
2002 .10
-
Predicting Foreign Exchange Rate Trend Using Machine Learning Technique
인터넷전자상거래연구
2017 .10
-
A Component Model-based Approach for Machining Time Prediction using Machine-Monitoring Data
한국경영과학회 학술대회논문집
2018 .04
-
[Session P] Weighted Support Vector Machine의 활용성에 대한 연구
한국경영과학회 학술대회논문집
2001 .04
-
머신러닝 플랫폼을 활용한 소프트웨어 교수-학습 모형 개발
정보교육학회논문지
2020 .01
-
Customer Order Scheduling Problems with a Fixed Machine-Job Assignment
Management Science and Financial Engineering
2005 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-325-016676667