메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第23卷 第4號
발행연도
2007.4
수록면
27 - 34 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
In the RC frame system using wide beam, many of main bars in beam are not anchored inside the adjacent column but anchored in the spandrel beam since beam width is larger than column. Therefore, the structural behavior of the beam-column joint of this system is affected by the rigidity of column and beam as well as the properties of spandrel beam. The effective width of beam will be more wide if the main bar of beam is strongly anchored in the spandrel beam. In order to find the variation of the joint behavior, an experimental test result is presented in this paper. Five wide beam-column-spandrel beam joint specimens are designed and tested under increasing cyclic moment at the joint. Main parameters considered in the test are the depth of spandrel beam and the anchorage detail of main bars of wide beam in the joint.
From the test it was found that the specimen with head anchorage had higher strength than the specimen with normal hook anchorage. Specimen with debonded reinforcement at out of 1d from column face failed showing moved plastic hinge and less strength than normal specimen. However, the dissipated energy increased 11%. On comparison with previous formulas, the most approximate calculation of joint strength can be acquired by using Wight's formula.

목차

Abstract
1. 서론
2. 기존 연구
3. 실험
4. 실험결과 및 분석
5. 기존 내력식의 평가
6. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-016627996