메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국태양에너지학회 한국태양에너지학회 학술대회논문집 한국태양에너지학회 2006년도 추계학술발표대회 논문집
발행연도
2006.11
수록면
143 - 148 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
For a conventional natural-circulation type solar water heater, the pressure head is limited by the height between the storage tank and hot water tap. Therefore, it is difficult to provide sufficient hot water flow rate for general usage. This study deals with a design modification of the storage tank to utilize the tap-water pressure to increase hot-water supply. Based on fluid dynamic and heat transfer theories, a series of modeling and simulation was conducted to achieve practical design requirements. An experimental setup was built and tested and the results were compared with theoretical simulation model. The storage tank capacity was 240 L and the outer diameter of piping was 15 ㎜. Number of tube turns tested were 5, 10, and 15. Starting with initial storage tank temperature of 80℃, the temperature variation of the supply hot water was investigated against time, while maintaining minimum flow rate of 10 LPM. Typical result showed that the hot water supply of minimum 30℃ could be maintained for 34 min with tap-water supply pressure of 2.5 atm, The relative errors between modeling and experiments coincided well within 10% in general.

목차

Abstract
1. 서론
2. 압력식 축열조의 모델링
3. 열전달 해석
4. 압력식 축열조의 성능실험
5. 계산 및 실험결과
6. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-563-017593365