지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한기계학회 Journal of Mechanical Science and Technology Journal of Mechanical Science and Technology Vol.20 No.10
- 발행연도
- 2006.10
- 수록면
- 1,670 - 1,679 (10page)
이용수
초록· 키워드
오류제보하기
The development of the oxidation, wear and corrosion resistant materials that could be used in severe environmental conditions is needed. The elementary technologies for surface modification include ion implantation and/or thin film coating. Furthermore, in order to develop ion implantation technique to the specimens with three-dimensional shapes, plasma-based ion implantation (PBII) techniques were investigated. As a result, it was found that the ion implantation and/or thin film coating used in this study were/was effective for improving the properties of materials, which include implantations of various kinds of ions into TiAl alloy, TiN films formed on surface of base material and coatings in high-temperature steam. The techniques proposed in this study provide useful information for all of the material systems required to use at elevated temperature. For the practical applications, several results will be presented along with laboratory test results.
목차
영어 초록
1. Introduction
2. Experimental Apparatus and Procedure
3. Results and Discussion
4. Conclusions
Acknowledgements
References
참고문헌 (37)
참고문헌 신청
Adler, R. J. and Picraux, S. T., 1985, “Repetitively Pulsed Metal Ion Beams for Ion Implantation," Nuclear Instruments and Methods in Physics Research Section B : Beam Interaction with Materials and Atoms, Vol.6, pp.123~128.
Haanappel, V. A. C. and Stroosnijder, M. F., 1998, "The Effect of Ion Implantation on the Oxidation Behavior of TiAl-based Intermetallic Alloys at 900°C," Int. J. of Surface and Coatings Technology, Vol.105, pp.147~154.
Klingenberg, M., Arps, J., Wei, R., Demaree, J. and Hirvonen, J., 2002, "Practical Applications of Ion Beam and Plasma Processing for Improving Corrosion and Wear Protection," Int. J. of Surface and Coating Technology, Vol.158~159, pp.164~169.
Kyung, W. L., Jae, S. B., Yeong, S. Y. and Kyu, Z. C., 2004, "A Study on the Mechanical Properties of Ti-8Ta-3Nb Alloy for Biomaterials," KSME International Journal, Vol.18, No.12, pp.2204~2208.
Li, X. Y., Taniguchi, S., Zhu, Y. C. Fujita, K., Iwamoto, N., Matsunaga, Y. and Nakagawa, K., 2001, "Effects of C, Nb and C+Nb Combined Ion Implantation on the Oxidation Resistance of ϒ-TiAl based Alloy," Materials Science and Engineering, Vol.316, pp.224
Haanappel, V. A. C. and Stroosnijder, M. F., 1998, "The Effect of Ion Implantation on the Oxidation Behavior of TiAl-based Intermetallic Alloys at 900°C," Int. J. of Surface and Coatings Technology, Vol.105, pp.147~154.
Klingenberg, M., Arps, J., Wei, R., Demaree, J. and Hirvonen, J., 2002, "Practical Applications of Ion Beam and Plasma Processing for Improving Corrosion and Wear Protection," Int. J. of Surface and Coating Technology, Vol.158~159, pp.164~169.
Kyung, W. L., Jae, S. B., Yeong, S. Y. and Kyu, Z. C., 2004, "A Study on the Mechanical Properties of Ti-8Ta-3Nb Alloy for Biomaterials," KSME International Journal, Vol.18, No.12, pp.2204~2208.
Li, X. Y., Taniguchi, S., Zhu, Y. C. Fujita, K., Iwamoto, N., Matsunaga, Y. and Nakagawa, K., 2001, "Effects of C, Nb and C+Nb Combined Ion Implantation on the Oxidation Resistance of ϒ-TiAl based Alloy," Materials Science and Engineering, Vol.316, pp.224
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
이온주입 제어에 의한 재료특성 개선에 관한 연구
Journal of Advanced Marine Engineering and Technology (JAMET)
2008 .11
-
Various surface modifications of polymer by ion implantation
한국고분자학회 학술대회 연구논문 초록집
2006 .04
-
Diffusion / Ion Implantation
대한전자공학회 단기강좌
1982 .01
-
POLYMER SURFACE MODIFICATION WITH PLASMA SOURCE ION IMPLANTATION TECHNIQUE
한국표면공학회지
1996 .10
-
질소이온주입에 의한 금형용 알루미늄의 표면개질특성
한국정밀공학회 학술발표대회 논문집
2004 .10
-
이온주입에 의한 Al5202의 표면특성에 관한 연구
한국기계가공학회 춘추계학술대회 논문집
2006 .06
-
금속이온주입 특성 개선을 위한 분자동역학적 연구
한국기계가공학회 춘추계학술대회 논문집
2009 .06
-
Surface modification of PTFE with ion implantation
한국고분자학회 학술대회 연구논문 초록집
2007 .10
-
[Retraction] Surface Modification of Aluminum by Nitrogen-Ion Implantation
International Journal of Precision Engineering and Manufacturing
2006 .01
-
낮은 에너지의 As₂^(+) 이온 주입을 이용한 얕은 n^(+)-p 접합을 가진 70nm NMOSFET의 제작 ( 70nm NMOSFET Fabrication with Ultra-shallow n+-p Junctions Using Low Energy As₂^(+) Implantations )
전자공학회논문지-SD
2001 .02
-
저 에너지 이온 주입의 개선을 위한 변형된 감속모드 이온 주입의 안정화 특성
전기전자재료학회논문지
2003 .01
-
Surface modification of polyimide film by argon ion implantation
한국고분자학회 학술대회 연구논문 초록집
2008 .04
-
질소이온주입에 의한 알루미늄의 표면개질특성
대한기계학회 춘추학술대회
2005 .05
-
질소이온주입에 의한 알루미늄의 표면개질특성
Journal of the Korean Society for Precision Engineering
2005 .12
-
이온주입에 의한 진공성형 포장재의 전기전도 특성
전기전자재료학회논문지
2003 .01
-
Controllability of Dopant Ion Number in Single Ion Implantation
International Conference on Electronics, Informations and Communications
1998 .01
-
Ion implantation of Rare-Earth elements in a structure of optical materials
ICEIC : International Conference on Electronics, Informations and Communications
2008 .06
-
이온주입에 의한 고분자(Polyphenylene Sulfide)표면 특성 변화와 선에너지전달(Pinear Energy Transfer)과의 관계
전기전자재료학회논문지
2005 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-550-017393535