메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 1999년도 동계학술발표회 논문집(Ⅰ)
발행연도
1999.11
수록면
200 - 204 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The evaporating heat transfer of R-22 in an extruded aluminum multichannel tubes has been experimentally studied. The experimental apparatus consists mainly of a heat pump refrigerant supply system, the test section of 100㎜ aluminum multichannel tubes, subcooler of liquid refrigerant, preheater for control of refrigerant inlet quality. The heat flux is applied by electric heating wire wound on the outer wall of the test section. A set of five thermocouples are embedded at the wall of the test section to measure the wall temperatures. The pressure drop across the test section is measured using a differential pressure transducer. For a refrigerant mass flux of 184 ㎏/㎡s and 378 ㎏/㎡s the inlet quality is varied from 0.1 to 0.9 and the wall heat flux is varied from 1 ㎾/㎡ to 4 ㎾/㎡. The evaporating heat transfer coefficients in the range of the present study were 150~250 W/mK, which is much lower than that for large-diameter pipe. The hydraulic diameter of the present multichannel tubes is 1.6㎜.

목차

ABSTRACT

1. 서론

2. 실험장치 및 방법

3. 데이터 처리

4. 실험결과 및 고찰

5. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015412941