메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 1999년도 하계학술발표회 논문집(Ⅰ)
발행연도
1999.6
수록면
19 - 24 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Flow boiling heat transfer coefficients of R22, R134a, R407C, and R410A were measured experimentally for a horizontal plain and microfin tube in an apparatus composed of three major loops : a refrigerant loop, a water loop, and a water-glycol loop. Test section in a refrigerant loop was made of a copper tube of 8.8㎜ inner diameter and 1000㎜ length respectively. The refrigerant was heated by passing hot water through an annulus surrounding the test section. All tests were performed at a fixed refrigerant saturation temperature of 5℃ with mass fluxes of 100~300㎏/㎡s. The results showed that at similar mass flux the flow boiling heat transfer coefficients(HTCs) of R134a were similar to those of R22 for both plain and microfin tube. HTCs of R407C were similar to those of R22 for a plain tube but were lower by 25~48% for a microfin tube. HTCs of R410A were higher than those of R22 by 20~63% for a plain tube and were similar to those of R22 for a microfin tube. In general, HTCs of a microfin tube were 1.8~5.7 times higher than those of a plain tube.

목차

ABSTRACT

1. 서론

2. 실험장치 및 실험방법

3. 결과 및 고찰

4. 결론

후기

5. 참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015411848