지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2006.2
- 수록면
- 35 - 41 (7page)
이용수
초록· 키워드
오류제보하기
The steel foundries with electric arc furnaces handling metal scraps have recently gained an attention as a potential source of dusts. The present study focuses on the analysis of dust emissions and removals during furnace charging and melting processes by commercial CFD software named FLUENT.
A body fitted grid system consisting of 880,000 meshes was first generated by Gambit for the electric arc furnace with the capacity of 60 ton/cycle and then FLUENT was invoked to solve the corresponding Navier-Stokers equation for the momentum, temperature and dust concentration. The entire processes from metal charging to metal melting were simulated to investigate the unsteady behaviors of fluid flows and dust concentrations.
The model simulation results showed that as the top of the electric arc furnace opened for metal charging, hot plumes bursted out from the furnace rose strongly by buoyance and escaped mostly through the main hood. Therefore, the capacity of main hoods determined the vent efficiency in the metal charging process.
As the furnace was closed after the metal charging and the metal melting processes was followed, the hot flow stream stretching from the furnace to the main hood was dissipated fast and the flow from the inlet of the bottom of the left hand side to the main and monitoring hoods constituted the main stream. And there was only a slow flow in the right hand side of the furnace. Therefore, the dust concentrations were calculated higher in the left hand side of the furnace, which was consistent with observations.
A body fitted grid system consisting of 880,000 meshes was first generated by Gambit for the electric arc furnace with the capacity of 60 ton/cycle and then FLUENT was invoked to solve the corresponding Navier-Stokers equation for the momentum, temperature and dust concentration. The entire processes from metal charging to metal melting were simulated to investigate the unsteady behaviors of fluid flows and dust concentrations.
The model simulation results showed that as the top of the electric arc furnace opened for metal charging, hot plumes bursted out from the furnace rose strongly by buoyance and escaped mostly through the main hood. Therefore, the capacity of main hoods determined the vent efficiency in the metal charging process.
As the furnace was closed after the metal charging and the metal melting processes was followed, the hot flow stream stretching from the furnace to the main hood was dissipated fast and the flow from the inlet of the bottom of the left hand side to the main and monitoring hoods constituted the main stream. And there was only a slow flow in the right hand side of the furnace. Therefore, the dust concentrations were calculated higher in the left hand side of the furnace, which was consistent with observations.
목차
Abstract
1. 서론
2. 연구 및 방법
3. 결과 및 고찰
4. 결론
감사의 글
참고문헌
참고문헌 (6)
참고문헌 신청
[학술지(정기간행물)] - / 1990 / Emission Factors For Iron And Steel Sources-Criteria And Toxic Pollutants
[학술지(정기간행물)] - / 1962 / Metallurgical Dust Collection In Open Hearth And Sinter Plant : 724 ~ 732
[학술지(정기간행물)] - / 1974 / Background Report AP-42 Section 12.13 SteelFoundries
[학술지(정기간행물)] - / 1953 / Proceedings Of The American Institute Of Mining And MetallurgicalEngineers : 160 ~ 161
[학술지(정기간행물)] - / 2000 / Application of computational fluid dynamics in the development and improvement of steelmaking processes Scandinavian 29 : 166 ~ 176
[학술지(정기간행물)] - / 1962 / Metallurgical Dust Collection In Open Hearth And Sinter Plant : 724 ~ 732
[학술지(정기간행물)] - / 1974 / Background Report AP-42 Section 12.13 SteelFoundries
[학술지(정기간행물)] - / 1953 / Proceedings Of The American Institute Of Mining And MetallurgicalEngineers : 160 ~ 161
[학술지(정기간행물)] - / 2000 / Application of computational fluid dynamics in the development and improvement of steelmaking processes Scandinavian 29 : 166 ~ 176
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Magnetic Field Analysis of the Electrode Arc Furnace in Steel Making Foundries
Journal of Magnetics
2003 .06
-
전기로 제강분진을 활용한 아스콘 포장도로의 먼지발생 ( The Dust Generation of Electric Arc Furnace Dust as a Filler of Asphaltic Concrete )
한국대기환경학회 학술대회논문집
1996 .01
-
Drop Tube Furnace를 이용한 순산소연소 조건의 로내탈황에서 석회석의 특성에 관한 연구
한국대기환경학회 학술대회논문집
2008 .10
-
산업용 가열로의 NOx 저감을 위한 배가스 재순환 기술 개발
한국대기환경학회 학술대회논문집
2019 .11
-
Drop Tube Furnace를 이용한 순산소 연소에서 석회석의 소성 및 로내탈황 특성
한국대기환경학회 학술대회논문집
2009 .05
-
활성탄으로 코팅된 전극에서 분진의 제거
한국대기환경학회지(국문)
2013 .12
-
The features of Asian Dust in last 100 years
한국기상학회 학술대회 논문집
2006 .10
-
주조용 전기유도로 적용 국소배기시스템 개발
한국대기환경학회 학술대회논문집
2007 .10
-
실내 공간별 미세먼지농도 비교 데이터의 시각화
한국주거학회논문집
2015 .08
-
Dust emission response to Asian dust radiative forcing
한국기상학회 학술대회 논문집
2006 .10
-
Characteristics of Heavy Metals in Road Dust in Ulsan City, Korea
한국대기환경학회 학술대회논문집
2006 .10
-
Quantitative Classification of Northeast Asian Dust Events
한국기상학회 학술대회 논문집
2006 .10
-
연소로에서 NO 배출 및 연소특성에 대한 수치해석적 연구 ( Numerical Simulation of NO Emission and Combustion Characteristics in Furnace )
한국대기환경학회지(국문)
1996 .12
-
황사발원지 (몽골) 토양에 대한 특성 분석
한국대기환경학회지(국문)
2010 .12
-
철강산업 용융로의 대기오염물질 배출계수 산정 연구
한국대기환경학회지(국문)
2004 .08
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-539-015290329