메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국펄프·종이공학회 펄프·종이기술 펄프·종이기술 제37권 제5호
발행연도
2005.12
수록면
70 - 77 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The development of printable Hanji is regarded as an important work to create a new demand of Hanji in information-oriented era. Hanji has rougher surface, huger absorption of ink and lower optical properties and printabilities than common printing papers. Improving those shortcomings of Hanji is required to be printable Hanji. Sizing and calendering have known as a way to make properties of paper good. Accordingly, this research was performed to find out useful sizing agents for reforming its drawbacks. Four sizing agents (CMC, corn starch, PVA, AKD) were used in this research. The optical properties and the printabilities of sized Hanji were tested. The obtained results were as follows. Based on concentration, each sizing agent was prepared. These were CMC (0.5, 1, 1.5%), corn starch (1, 2, 3%), PVA (1, 5, 10%), AKD (0.05, 0.1, 0.15%) respectively. After sizing, we performed calendering treatment with pressure of 0.5, 1 kgf/㎠. All the sizing agents and calendering treatment improved the properties of Hanji to some extent. Particularly, corn starch was good for gloss. In case of printability, 0.1% AKD with 1 kgf/㎠ was recommendable for typography ink density, 3% corn starch with 0.5 kgf/㎠, inkjet ink density, 2% corn starch with 0.5 kgf/㎠, inkjet ink girth. PVA and AKD without calendering were counter-effective agents for inkjet ink density. Printable Hanji is required to have not only better surface strength enough to appear non-picking, higher ink density and lower show-through than base paper but also the lowest ink girth in comparison with base paper. When referring to them, efficient sizing agents were regarded as 0.1% AKD with 1 kgf/㎠, calender pressure, for typography printing and 2% corn starch with 0.5 kgf/㎠, calender pressure, for inkjet printing.

목차

ABSTRACT

1. Introduction

2. Materials and Methods

3. Results and Discussion

4. Conclusions

Literature cited

참고문헌 (12)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-586-015187977