광섬유와 평면도파로 견합기의 소산장 결합을 이용하여 디아릴에텐 유도체 DM-BTE(1,2-bis[2,5-dimethylthio-phen-3-yl]-hexafluorocyclopentene)의 광유도 굴절률 변화(photo-induced refractive index change)에 관하여 그 특성을 평가하였다. DM-BTE가 분산된 평면도파로는 자외선과 가시광선(λ>450 ㎚)의 조사에 의해 광변색 반응이 가역적으로 진행되었으며 굴절률변화에 의한 공명 파장 또한 가역적으로 이동하였다. 광변색 반응이 진행되는 동안 평면도파로의 결정상태(crystal shape)는 일정한 형태를 유지하였으며, 자외선 조사시간에 대한 소자의 파장응답은 0.057 ㎚/sec 이었고 포화시간은 60 sec로 나타났으며, 가시광선이 다시 조사될 때의 공명파장의 변화는 0.028 ㎚/sec 이었고, 복귀시간은 140 sec로 측정 되었다.
We have manufactured and characterized the fiber-to-Planar Waveguide Coupler for analysis of the photo-induced refractive index change of DM-BTE (1,2-bis[2,5-dimethylthio-phen-3-yl]-hexafluorocyclopentene). When irradiated with ultraviolet light, the colorless diarylethene(DM-BTE)-crystal turned red while keeping the crystal shape. The red color was bleached by irradiation with visible light(λ > 450 ㎚). The resonant wavelength was shined and recovered owing to the refractive index variation of the planar waveguide because of its photo-functional properties on exposure to UV and visible light. The wavelength responses of this switch by UV exposure were measured as 0.057 ㎚/sec with saturation time of 60 seconds. and when illuminated by visible light, resonance wavelength variations were measured as 0.028 ㎚/sec, with recovery time of 140 seconds.