메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, thin film gas sensor based on tin oxide was fabricated to examine its characteristics. Target gas is acetonitrile (CH₃CN) which is a blood simulant for the chemical warfare agent. Sensing materials are SnO₂, SnO₂/Pt, and Sn/Pt with thickness from 1000 to 3000Å. The sensor consists of a sensing electrode with inter-digit (IDT) type in front side and a heater in rear side. Resistance changes of sensing materials are monitored on real time basis using a data acquisition board with a 12-bit analog to digital converter. Sensitivities are measured at different operating temperatures also with different gas concentrations and film thickness. The high sensitivity is obtained for Sn (3000Å)/Pt (30Å) at 300℃ for 3 ppm. Response and recovery times were about 40 and 160 s, respectively. Repetition measurements showed very good results with ±3% in full scale range.

목차

Abstract

1.INTRODUCTION

2.EXPERIMENTS

3.RESULTS AND DISCUSSION

4.CONCLUSIONS

ACKNOWLEDGEMENTS

REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-539-014374059