지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2004.3
- 수록면
- 113 - 120 (8page)
이용수
초록· 키워드
오류제보하기
The purpose of this study is to develop the application method of structural welded wire fabric(WWF) for practical use in
domestic construction industry. One of the main reasons causing problems in adopting WWF for building construction is the
variety of WWF types, which decrease productivity of the factory and the construction field. So it is needed to standardize the
shape and type of WWF. In this study we made typical types of WWF for slab and wall each, which were adapted in the pilot
project.
For analysing the pilot project application results, the daily work sheet was used. The man-power for reinforcing work was
recorded using it. For making comparison between the productivity of using typical reinforcing bar and that of WWF, one floor
slab and wall were reinforced by steel bar. Using the records of the work sheet, the productivity of steel bar and that of WWF
were calculated. The labor saving effect of using WWF was 21.2% in slab reinforcing work and 15.0% in wall reinforcing
work. In this pilot project, WWF was adopted 29.3% for slab and 38.3% for wall. Using this adopting percentage and labor
saving effect, the labor cost of WWF was calculated. Provided the cost of typical steel bar reinforcing work is 100%, the
calculated labor cost of WWF is 28.4% for slab reinforcing work and 60.8% for wall.
As the results of this study, the labor and time saving effect of WWF are proved and calculated. But some unrespected
problems were found out in the execution process of the pilot project and those were recorded in several aspects of
engineering, management, material, and field work. These classified database will be helpful for spreading WWF in domestic
construction industry.
domestic construction industry. One of the main reasons causing problems in adopting WWF for building construction is the
variety of WWF types, which decrease productivity of the factory and the construction field. So it is needed to standardize the
shape and type of WWF. In this study we made typical types of WWF for slab and wall each, which were adapted in the pilot
project.
For analysing the pilot project application results, the daily work sheet was used. The man-power for reinforcing work was
recorded using it. For making comparison between the productivity of using typical reinforcing bar and that of WWF, one floor
slab and wall were reinforced by steel bar. Using the records of the work sheet, the productivity of steel bar and that of WWF
were calculated. The labor saving effect of using WWF was 21.2% in slab reinforcing work and 15.0% in wall reinforcing
work. In this pilot project, WWF was adopted 29.3% for slab and 38.3% for wall. Using this adopting percentage and labor
saving effect, the labor cost of WWF was calculated. Provided the cost of typical steel bar reinforcing work is 100%, the
calculated labor cost of WWF is 28.4% for slab reinforcing work and 60.8% for wall.
As the results of this study, the labor and time saving effect of WWF are proved and calculated. But some unrespected
problems were found out in the execution process of the pilot project and those were recorded in several aspects of
engineering, management, material, and field work. These classified database will be helpful for spreading WWF in domestic
construction industry.
목차
Abstract
1. 서론
2. 구조용 용접철망의 개요
3. 용접철망 적용상의 문제점 분석 및 실용화 방안
4. 시범사업 적용
5. 현장적용 성과 분석
6. 결론
감사의 글
참고문헌
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
구조용 용접철망 실용화 방안 연구
대한건축학회 학술발표대회 논문집 - 구조계
2003 .04
-
제3차 세계 물 포럼
한국관개배수회지
2003 .01
-
대구·경북의 제7차 세계물포럼(7th WWF) 주제발굴
대한토목학회지
2013 .03
-
철근콘크리트 연속 깊은 보에서 전단철근으로서 이형 용접철망의 적용성 평가
대한건축학회 논문집 - 구조계
2005 .12
-
제3회 세계 물 포럼 참가보고
한국관개배수논문집
2003 .01
-
환경호르몬 세계적 공포로 번져 - 내분비 교란물질 인간의 정자 감소 연구 - WWF발표 유해성 물질은 67종
골판지포장,물류
1998 .01
-
제4차 세계물포럼 추진 및 참여
한국수자원학회 학술발표회
2006 .01
-
Numerical investigation on the structural behavior of two-way slabs reinforced with low ductility steel
Structural engineering and mechanics : An international journal
2018 .01
-
Ductility of concrete slabs reinforced with low-ductility welded wire fabric and steel fibers
Structural engineering and mechanics : An international journal
2014 .01
-
The Water Resources of Northeast Asia
한국수자원학회 학술발표회
2006 .01
-
용접철망을 사용한 불연속 슬래브 접합부의 구조성능
대한건축학회 학술발표대회 논문집 - 구조계
2005 .10
-
용접철망을 사용한 연속 슬래브 접합부의 구조성능
대한건축학회 학술발표대회 논문집 - 구조계
2005 .10
-
유리섬유보강 슬래브의 표면저항특성 고찰
한국철도학회 학술발표대회논문집
2011 .10
-
용접철망을 사용한 벽체-슬래브 접합부의 구조성능
대한건축학회 논문집 - 구조계
2012 .04
-
WWF4 각료 선언문
한국관개배수회지
2006 .01
-
강섬유보강 콘크리트를 사용한 무배근 연속슬래브의 구조성능
대한건축학회 논문집 - 구조계
2015 .08
-
보강토옹벽 설계기준 및 S/W 표준화
한국지반신소재학회 학술발표회
2008 .04
-
인장시험에 의한 고강도철근(500㎫)의 용접특성에 관한 연구
대한건축학회 논문집 - 구조계
2011 .01
-
Half Slab공법의 현장적용에 관한 기초적 연구 ( A Fundamental Study on the Field Application of Half Slab Method )
대한건축학회 학술발표대회 논문집 - 구조계
1994 .10
이 논문의 저자 정보
이 논문과 함께 이용한 논문
이형철선을 이용한 용접철망 슬래브 휨성능 평가
정승원
,
홍건호
한국콘크리트학회 학술대회 논문집
2021
.11
데크플레이트를 사용한 강섬유보강콘크리트 슬래브의 구조성능 평가
홍건호
,
채병민
대한건축학회 논문집 - 구조계
2018
.07
데크플레이트를 이용한 강섬유콘크리트 슬래브의 구조성능
홍건호
대한건축학회 논문집 - 구조계
2014
.07
이형 용접철망을 전단철근으로 사용한 철근콘크리트 연속 깊은 보의 구조적 거동에 대한 실험적 연구
양근혁
,
정현수
한국콘크리트학회 학술대회 논문집
2005
.05
용접철망을 사용한 벽체-슬래브 접합부의 구조성능
노영숙
,
서태석
,
박현수
대한건축학회 논문집 - 구조계
2012
.04
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-540-014285185