메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한기계학회 대한기계학회 논문집 A권 대한기계학회논문집 A권 제28권 제1호
발행연도
2004.1
수록면
1 - 10 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper presents a navigation garde capacitive microaccelerometer, whose low-noise high-resolution detection capability is achieved by a new electrode design based on a high-amplitude anti-phase sense voltage. We reduce the mechanical noise of the microaccelerometer to the level of 5.5ug/ ??HZ by increasing the proof-mass based on deep RIE process of an SOl wafer. We reduce the electrical noise as low as 0.6ug/ ??Hz by using an anti-phase high-amplitude square-wave sense voltage of 19V. The nonlinearity problem caused by the high-amplitude sense voltage is solved by a new electrode design of branched finger type. Combined use of the branched finger electrode and high-amplitude sense voltage generates self force-balancing effects, resulting in an 140% increase of the bandwidth from 726Hz to 1,734Hz. For a fixed sense voltage of 10V, the total noise is measured as 2.6ug/ ??HZ at the air pressure of 3.9torr, which is the 51 % of the total noise of 5.1ug/ ??Hz at the atmospheric pressure. From the excitation test using I g, 10Hz sinusoidal acceleration, the signal-to-noise ratio of the fabricated microaccelerometer is measured as 105dB, which is equivalent to the noise level of 5.7ug/ ??Hz. The sensitivity and linearity of the branched finger capacitive microaccelerometer are measured as 0.638V /g and 0.044%, respectively.

목차

Abstract

1.서론

2.설계 및 해석

3.제조 공정

4.실험결과 및 분석

5.결론

후기

참고문헌

참고문헌 (9)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-014040715