메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국자동차공학회 한국자동차공학회 춘 추계 학술대회 논문집 한국자동차공학회 2003년 추계학술대회논문집 1호
발행연도
2003.11
수록면
419 - 425 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (5)

초록· 키워드

오류제보하기
The thickness of flame and preheat zone from burning velocity which was computed, using premix code of Chemkin program for ethanol-air mixture. Also the thickness was measured from temperature profile which is also obtained from premix code for the equivalence ratio of 0.6 to 1.6. The computations were carried out for the laminar flame thickness and burning velocity under the unburned gas pressure 0.5bar-30bar and temperature of 300K-700K at
Φ1.0. Comparison of the results showed no difference between these two methods. The flame thickness was decreased by increasing the pressure and temperature, but, the affect of pressure is more significant than the effect of temperature on the flame thickness. The thickness of preheat zone was about 68.5% of the flame thickness, and the ratio of measured flame thickness in calculated flame thickness is about 61.5%. The flame thickness was predicted by using the following equations.

목차

ABSTRACT

1.서론

2.화염의 연소속도 계산

3.화염의 두께 계산

4.계산결과

5.고찰

6.결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-556-014024328