지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2003.1
- 수록면
- 61 - 68 (8page)
이용수
초록· 키워드
오류제보하기
The main purpose of this study is to investigate and evaluate the joint types of weathering stell derails in exterior wall. Usually rust influence bad impact against steel. So proper treatments against rust are necessary need in constructing buildings. But in case of weathering steel, rust(stabilized rust) rather protect steel and increase durability.
The results of study are as follows:
1. The color of rust on wearhering steel surface is changed onto dark-chocolate color, after serring up the sample midel. And the difference of color by directions and parts is gradually reduced.
2. The rust stains on the surface by rebounded rains are not removed. So exterior wall of weathering steel must part from the floor level, about 30cm.
3. The joint types of weathering steel are divided into 'butt joint type', 'overlapped joint type', and 'folded joint type'.
4. In aspect of waterproof performance, 'overlapped joint type' is superior to any other joint type.
The results of study are as follows:
1. The color of rust on wearhering steel surface is changed onto dark-chocolate color, after serring up the sample midel. And the difference of color by directions and parts is gradually reduced.
2. The rust stains on the surface by rebounded rains are not removed. So exterior wall of weathering steel must part from the floor level, about 30cm.
3. The joint types of weathering steel are divided into 'butt joint type', 'overlapped joint type', and 'folded joint type'.
4. In aspect of waterproof performance, 'overlapped joint type' is superior to any other joint type.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Atmospheric Corrosion Process for Weathering Steel
Corrosion Science and Technology
2008 .01
-
Design of Advanced Weathering Steel with High Corrosion Resistance for Structural Applications
Corrosion Science and Technology
2005 .01
-
전기도금강판의 점상 Rust 발생원인 조사
한국표면공학회 학술발표회 초록집
1990 .05
-
알루미늄 부품의 백록 저감 기술 개발
한국자동차공학회 추계학술대회 및 전시회
2010 .11
-
녹제거 폴리머겔의 제조 및 특성
한국안전학회지
2004 .01
-
Ion Selective Permeability of Rust Layers on Low Alloy Steels under the Chloride Ion Existence
Corrosion Science and Technology
2002 .01
-
${Al}_{2}{O}_{3}$/304스트레인레스강 접합체 계면구조가 접합강도에 미치는 영향
한국재료학회지
1993 .01
-
The Effect of Initial Rust on the Bond Strength of Reinforcement
KSCE JOURNAL OF CIVIL ENGINEERING
2004 .01
-
Effect of the Existing Rust on Bond Strength of Concrete and Reinforcement
한국콘크리트학회 학술대회 논문집
2004 .05
-
Work Stealing Strategies for Efficient Multi-task Scheduling on Rust
한국정보과학회 학술발표논문집
2014 .12
-
Anti-Rusting 평가에 관한 연구
한국트라이볼로지학회 학술대회
2018 .04
-
무도장 내후성 강 교량의 밀폐형 박스거더 내부의 부식에 대한 고찰
한국산학기술학회 논문지
2015 .04
-
대형 콘크리트 판넬구조의 수평접합부 거동에 관한 연구 - Wedge Type Joint를 중심으로 ( The Behavior of Horizontal Joints in Structural Concrete Large Panel System )
대한건축학회 학술발표대회 논문집 - 구조계
1990 .10
-
Joints in Steel Construction: Simple Joints to Eurocode 3
한국강구조학회지
2017 .04
-
Protective Ability Index of Rust Layer Formed on Weathering Steel Bridge
Corrosion Science and Technology
2007 .01
-
펄스파워를 이용한 펄스반복율에 변화에 의한 고효율 RUST (녹) 제거 특성에 관한 연구
대한전기학회 학술대회 논문집
2002 .07
-
Anti-Rusting Oil 종류별 특성 평가에 관한 연구
한국트라이볼로지학회 학술대회
2014 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-540-013497374