지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2002.12
- 수록면
- 199 - 206 (8page)
이용수
초록· 키워드
오류제보하기
Municipal solid waste's the quantity and characteristic of disgharge in accoudance with generating source can be very useful for the basic data in order to dispose of dolid waste and to utilize it. The purpose of this study is to show the effective method of disposing of solid waste by dint of studying solid waste's the quantity and the characteristic of discharge which office buildings built in the first road land of Dongsungro, the central place of Daegu, discharge. The results obtained could be summarized as follows :
1) The discharge rate of office buildings in the city is 0.3~0.5(kg/person·day) and the average of dischange rate is 0.357(kg/person·day). 2) The factors which influence solid waste's the quantity of production are work-type, building scale, the number of workers and so on. Especially work-type and the number of workers are main factors. 3) According to solid waste's the characteristic of discharge the ratio of inflammable waste is over 85%. The caloric value is higher than any other places. 4) Solid waste;s the quantity of production which office buildings built in Junggu discharge is about 7.489kg. So we can produce eletric power for this area by bumming up municipal solid waste of which the calorfic value is high.
1) The discharge rate of office buildings in the city is 0.3~0.5(kg/person·day) and the average of dischange rate is 0.357(kg/person·day). 2) The factors which influence solid waste's the quantity of production are work-type, building scale, the number of workers and so on. Especially work-type and the number of workers are main factors. 3) According to solid waste's the characteristic of discharge the ratio of inflammable waste is over 85%. The caloric value is higher than any other places. 4) Solid waste;s the quantity of production which office buildings built in Junggu discharge is about 7.489kg. So we can produce eletric power for this area by bumming up municipal solid waste of which the calorfic value is high.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
일반가정에서의 배출쓰레기 관측을 통한 배출특성 연구
환경연구
2000 .12
-
북한산 국립공원의 고형 폐기물에 관한 연구
기술사
1986 .01
-
우리나라 다목적 Dam 운영의 문제점과 개선방안
기술사
1986 .01
-
도시 생활쓰레기의 배출 특성에 따른 효율적 관리방안 연구
환경연구
1998 .12
-
순천시의 생활폐기물 발생량 예측 및 재활용시설의 용량산정에 관한 연구
폐기물자원화
2001 .01
-
Treatment of Municipal solid waste using a composting process
한국생물공학회 학술대회
2004 .04
-
중국의 固體廢棄物汚染防治法
환경법연구
2004 .01
-
사무용도 건물의 생활쓰레기 배출원단위 작성에 관한 연구 - 대구광역시를 중심으로 - ( A Study on the A unit of Municipal Solid Wastes in Office-building - Case Study of in Daegu metropolitan city - )
대한건축학회 학술발표대회 논문집 - 계획계
2001 .10
-
CHARACTERISTICS OF WASTEWATER GENERATED FROM GASIFICATION OF MUNICIPAL SOLID WASTE
AFORE
2014 .11
-
Application of food waste Leachate to a municipal solid waste incinerator for reduction of NOx emission and ammonia water consumption
Environmental Engineering Research
2015 .06
-
수원시 생활폐기물의 자원화를 위한 관리시스템의 최적화
대한환경공학회 학술발표논문집
1998 .12
-
농업시설 난방을 위한 축산폐기물의 고형 연료화 연구
바이오시스템공학(구 한국농업기계학회지)
2007 .01
-
A comprehensive optimization model for integrated solid waste management system: A case study
Environmental Engineering Research
2019 .06
-
Municipal solid waste management in Aba, Nigeria : Challenges and prospects
Environmental Engineering Research
2017 .09
-
Comparative Evaluation of Municipal Solid Waste Incinerator Designs by Flow Simulation
KSME/JSME THERMAL and FLUID Engineering Conference
1994 .07
-
Case analysis on generation and management of solid waste generated by natural disaster
대한환경공학회 학술발표논문집
2007 .12
-
The Improvement for Operational Convenience of Solid Waste Management System
한국방사성폐기물학회 학술대회
2017 .01
-
국내 생활폐기물의 화학적 특성 산정에 관한 연구
한국환경관리학회 학술연구발표회 논문초록집
2003 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-540-013497298